For many years there was just one reputable option to keep data on your computer – using a disk drive (HDD). Having said that, this kind of technology is presently displaying its age – hard drives are loud and slow; they’re power–ravenous and are likely to produce quite a lot of warmth throughout intense procedures.
SSD drives, on the other hand, are swift, consume a lesser amount of power and tend to be far less hot. They provide a new method of file accessibility and data storage and are years in advance of HDDs with regard to file read/write speed, I/O performance and power efficiency. Figure out how HDDs fare up against the modern SSD drives.
1. Access Time
SSD drives give a completely new & impressive solution to file storage based on the use of electronic interfaces as an alternative to just about any moving components and rotating disks. This new technology is faster, enabling a 0.1 millisecond file access time.
The technology powering HDD drives times all the way back to 1954. And although it’s been significantly polished as time passes, it’s still no match for the revolutionary concept behind SSD drives. Having today’s HDD drives, the top data access speed you’re able to attain can vary between 5 and 8 milliseconds.
2. Random I/O Performance
Caused by the completely new revolutionary data file storage technique incorporated by SSDs, they feature better file access speeds and better random I/O performance.
For the duration of Sprayberry Hosting’s lab tests, all SSDs revealed their capacity to take care of at the least 6000 IO’s per second.
With a HDD drive, the I/O performance steadily raises the more you employ the hard drive. Having said that, right after it gets to a specific limitation, it can’t go faster. And due to the now–old concept, that I/O limit is noticeably below what you might find having an SSD.
HDD can only go so far as 400 IO’s per second.
The absence of moving elements and spinning disks in SSD drives, and the latest improvements in electronic interface technology have resulted in a much risk–free data file storage device, with an common failing rate of 0.5%.
HDD drives work with rotating disks for holding and browsing info – a technology since the 1950s. And with hard disks magnetically hanging in the air, spinning at 7200 rpm, the odds of something failing are usually bigger.
The normal rate of failing of HDD drives can vary amongst 2% and 5%.
4. Energy Conservation
SSD drives work practically noiselessly; they don’t generate extra warmth; they don’t mandate supplemental cooling down solutions and take in far less energy.
Trials have demonstrated that the common power use of an SSD drive is somewhere between 2 and 5 watts.
HDD drives are notorious for getting noisy; they’re liable to getting too hot and whenever there are several disk drives within a hosting server, you have to have an additional cooling unit used only for them.
As a whole, HDDs consume somewhere between 6 and 15 watts.
5. CPU Power
SSD drives support swifter data file accessibility speeds, that, subsequently, allow the processor to complete data calls considerably quicker and to return to different jobs.
The common I/O hold out for SSD drives is barely 1%.
HDD drives permit reduced access speeds compared to SSDs do, resulting in the CPU being required to delay, whilst reserving resources for your HDD to discover and return the demanded data file.
The regular I/O wait for HDD drives is just about 7%.
6.Input/Output Request Times
In the real world, SSDs carry out as wonderfully as they have for the duration of our testing. We produced a full system data backup on one of our production machines. Throughout the backup procedure, the typical service time for I/O demands was indeed below 20 ms.
Compared to SSD drives, HDDs offer considerably slower service times for I/O queries. Throughout a hosting server backup, the common service time for an I/O request can vary between 400 and 500 ms.
7. Backup Rates
Speaking about back–ups and SSDs – we have noticed a significant progress in the back up rate as we moved to SSDs. Today, a common hosting server back–up can take only 6 hours.
We used HDDs exclusively for lots of years and we have now pretty good familiarity with how an HDD performs. Backing up a hosting server furnished with HDD drives can take around 20 to 24 hours.
- Live Demo
- All of our Virtual Private Servers provide no setup fees and operate in a stable network providing 99.9% of uptime. Full admin server access warranted.
Compare our prices
- Check out our rates and choose the very best Virtual Private Server for your dynamic web sites. It is easy to migrate to a more advanced VPS Web Hosting package with simply a click of the mouse.
- Compare our hosting plans
- Our representatives are on duty for you 24 hours to respond to any queries with regards to our VPS Web Hosting services. 1–hour reply–back time frame warranty.